SHIRUSHI App for PC

[Easy Wi-Fi settings for Shirushi machines “SHIRUSHI App”]
With the "SHIRUSHI App", you can easily connect Shirushi's machines such as "Web3 Maker" to Wi-Fi from your smartphone.
Once you set up the Sign IoT product, you don't have to worry about anything else.
You too can enjoy a comfortable and exciting Web3 life!

◎Recommended environment
iOS 17 or later

◎Wi-Fi connection procedure for IoT devices
Once you have an IoT device at hand, you can connect to Wi-Fi using this app by following the steps below.
① Connect your smartphone to 2.4GHz Wi-Fi.
(2.4GHz Wi-Fi often has a symbol such as "_g" or "_2" at the end of the SSID.Use the encryption key (password) corresponding to this SSID to Please connect to Wi-Fi)
② Enter the encryption key (password) of the Wi-Fi that your smartphone is connected to in the encryption key (password) of this application.
③ Connect the USB cable to Shishisha's IoT product and supply power. When power supply is complete, the red LED on the side of the device will light up to request Wi-Fi information.
(If you have multiple IoT products to configure Wi-Fi settings, please enter the number in the number of configured devices in this app)
④Click the "Start Settings" button on this app to start Wi-Fi settings for the IoT product.
⑤When Wi-Fi setup starts, the real-time setup status will be displayed. If the Wi-Fi settings on the IoT product side are completed at this time, it will be reflected in this app, and you can check how many devices the settings have been completed.
⑥ Wi-Fi settings will stop when the specified number of devices have been set or a certain amount of time has passed.

◎Notes
・When using the app, please turn on location information.
- There is a limit to the number of router sessions, so please check the number of router sessions you are using before using.
・The Wi-Fi frequency cannot be used at "5GHz", so please confirm that the Wi-Fi frequency is "2.4GHz" before use.

◎If you cannot connect
We apologize for the inconvenience, but please contact us via the Web3Maker service site.
https://web3maker.io/inquiry