미리24 스마트 비화재보 차단시스템 for PC

In advance 24, the normal operation of the detector due to fire is properly alarmed, non-fire reports caused by non-fire detector operation or equipment failure, etc. are blocked at the source As a result, non-fire alarms (malfunctions) do not occur any more.

Miri24 measures the voltage of the detector circuit in real time and monitors it. In the event of a fire alarm, the administrator notifies the content of the alarm to the manager's mobile phone, and immediately reports the fire to 911. no see.

Therefore, it is possible to block the issuance of a non-fire alarm and to issue a fire alarm only to an actual fire, so that the occupants are evacuated immediately after the fire alarm, thereby dramatically reducing the casualties caused by fire. Smart malfunction prevention device incorporating IOT technology “You can say.

The receiver of the automatic fire detection system that is currently installed and operated has limitations in its operating principle that non-fire alarms (malfunctions) can only occur. In other words, it is designed not to issue a fire alarm only when the detector detects and operates a fire, but to trigger an alarm unconditionally when the voltage of the detector circuit drops below a certain level for any reason.

In the future, if a CPU capable of performing 24 functions is installed in the receiver and automatic fire detection equipment such as a detector using AI (artificial intelligence) is installed, it is thought that the occurrence of non-fire alarm itself can be prevented. The current Miri24 can completely block more than 90% of these non-fire warnings and can even predict the possibility of non-fire warnings.

The most desirable and good thing for fire safety management is that the responsible personnel work 3 shifts a day, monitor 24 hours a day, and immediately repair and maintain the measures taken. However, since the burden on the site is too great, it is recommended to inspect the exterior at least once a month.

Miri24's 24-hour monitoring of receiver and detector circuits has the same effect as hiring a large number of people and managing them 24 hours a day, working three shifts a day.

It is more detailed and accurate than the monthly appearance inspection, and when problems such as aging of the detector or corrosion due to moisture penetration or errors in related devices occur, it is detected in advance and measures are taken before a non-fire alarm (malfunction) occurs. After an outbreak, take action in advance without rushing to ensure a very stable fire safety management.

If a problem occurs, the control center will know in advance and respond promptly to repair it immediately according to the contract.

However, it is recommended to conduct bi-monthly or quarterly visits to check whether the induction lamp is on or not, and to test the start of the pump, except for the detector circuit, and to supplement the rest by operation function check and comprehensive detailed check.